Shoei RF-1200 Vessel Helmet

The pinnacle of perfection, the RF-1200 represents the culmination of 56 years of helmet heritage and has been designed, from its inception, to be an industry leader in comfort, performance and protection. The wind tunnel tested shell has been optimized to provide a compact and aerodynamic shape, reducing wind-noise, buffeting and weight. Shoei has not only designed the RF-1200 to be one of the most comfortable helmets on the market, but also one of the safest, meeting both DOT and SNELL M2015 safety standards.

Whether you are a track day enthusiast or cross-country cruiser, the RF-1200 will allow you to ride with confidence, freeing you to concentrate on the road and most importantly….enjoy the ride.

Slim And Light Weight Design

One of the most important features of a quality helmet is that you hardly know it’s there protecting your head. Shoei has reduced the weight of the RF-1200 by using a slimmer design and building a distinct line into the side of the helmet that also serves as an accent. As a result, the new Shoei RF-1200 is lighter than any other Snell certified helmet in the current Shoei lineup.

Shell Construction

The slim design of the Shoei RF-1200, with its distinct accent cut line, widens the bottom of the helmet to help ease the process of putting the RF-1200 on or taking it off. Further advancing the comfort of the AIM+ shell is the industry leading four shell sizes that the Shoei RF-1200 comes in. The impact-absorbing dual liner consists of two layers incorporating different densities, helping to effectively balance the potential impact applied to the more rigid shell.

Quietness

Through advancements in the aerodynamic shape, improved interior linings and a new and improved shield system the rider will experience a very quiet and comfortable riding experience. The interior of the RF-1200 has achieved a balance of a comfortably soft fit and a firm, stable hold. The new design of the cheek pads also improves the motion of the neck, thus helping the rider to check traffic behind him/her for example.

Shield System

The CWR-1 Pinlock shield features ribs on top and bottom of the shield to improve rigidity and eliminate bending of the shield caused by wind pressure or the opening and closing of the shield. Independent beading in the top and sides of the Shoei RF-1200 help to keep the seal of the shield tight and eliminate any excess air. In addition to the CWR-1 shield, Shoei has developed a new base plate for the RF-1200. The Quick-Release Self-Adjusting base plate is spring-loaded and pulls the shield back onto the helmet, sealing it tightly against wind and rain. The addition of a five-stage rotating dial allows for fine tuning of the base place for easy shield adjustments.

Ventilation

A large lower three position vent, three upper air vent intakes and four uniquely positioned upper exhaust outlet vents combine with the Dual Density EPS liner to allow cooling air to travel unrestricted through tunnels created in the EPS liner.

Features:

• Four shell sizes
• Dual density EPS liner
• Superior ventilation
• 3D Max-Dry System II Liner
• E.Q.R.S. (Emergency Quick-Release System) CWR-1 Shield System
• Neatly secure chin strap
• Includes Pinlock pins and lens insert
• Includes breath guard and chin curtain
• Snell M2015 and DOT Certified

Icon Wireform Jacket

The three-season Icon Wireform Jacket hits all the marks when it comes to keeping it light and under control. Aggressively cut for the sport riding position, the Wireform Jacket comes with slightly pre-curved arms, comfort molded neoprene collar, unique reinforced grid chassis, and a full D3O (shoulders, elbows, and back) package speak to the Wireform’s riding pedigree. Reflective hits provide visibility in low-light conditions, while a removable insulated SatinCore liner extends your riding season deep into the fall.

Features:

• ICON sport fit
• Dynax ballistic nylon chassis
• D3O impact protectors – shoulders, elbows and back
• Removable insulated SatinCore liner
• 3M reflective accents
• Reflective thermoplastic chest logo
• Integrated flex zones
• Neoprene collar
• Pre-curved arms
• YKK zippers
• Internal zippered cargo pockets

Icon Overlord Boot

True confidence starts with the right footwear. The Icon Overlord Boot is the demanding choice for denizens of speed. Where other sporting boots are heavy, this is light, breathable, more dynamic for sport riding. Feel is of utmost importance at the limit, and the Overlord boot delivers while retaining proper reinforcement.

The leather upper is combined with Overmolded mesh and articulated textiles for optimum performance while maintaining fit and flexibility. The TPU shin, heel and ankle plates, combined with a replaceable toe scuff guard, prepare the Overlord Boot for duty at the feet of the aggressive Icon rider.

Features:

• Leather chassis
• Mesh paneling
• TPU Injected shin, heel and ankle plates
• Overmolded mesh panels
• Replaceable toe scuff guard, toe sliders (sold separately)
• Axialmetric steel shank
• Shifter interface ribs
• Zipper closure
• CE Certified EN 13634-2010

Forcefield Grid Knee Protector

Ergonomically designed for riding, the Forcefield Grid Knee Protectors feature twin adjustable retaining straps, an abrasion resistant outer with mesh windows for added breathability, anti-bunch scalloped rear recess and CE Level 2 approved armor.Lightweight, tough, highly flexible, fully breathable and CE level 2 approved, the Grid combines all of the essentials of a quality knee protector.

• CE Level 2
• Dyneema skid guard
• NeT Armor 9mm thick
• Twin Epuipull retaining straps
• Abrasion resistant outer
• Mesh windows for increased breathability and direct airflow
• Ergonomic design
• Anti-bunch sleeve
• Highly flexible
• RPT (Repeat Performance Technology)
• Machine washable (with the armor removed)
• Pre-formed for comfort
• Sold as a pair